FOLDING 'SUITCASE STYLE' ACCESS RAMPS
Our ramps are a cost effective, long term solution to help with the requirements
as laid down by the Disability Discrimination Act Part III and in particular, the
sections relevant to entering a premises and the partially sighted. High Visibility
contrasting colouration and a slip resistant surface make these ramps fully compliant
and practical in a retail environment.
DOWNLOAD DATA SHEET
- Engineered to exceed current DDA act legislation and manufactured in UK.
- Convenient to use and store and represent the best quality and price
value in the market.
- Constructed from heavy gauge aluminium, for lightness and is powder coated
in high visibility yellow for maximum visibility and corrosion resistance.
- Folds for convenient storage
- They are designed to comply with BS8300: 2991, part M of UK building regulations
and The Disability Discrimination act 1996.
- ISO 9001
Available Sizes:
YPTFR - 3 feet length version
YPFFR - 4 feet length version
YPFFR - 5 feet length version
YPSFR - 6 feet length version
TECHNICAL INFORMATION
Specification:
3 foot ramp: Length: 900 mm
Width: 760 mm (open) 390 mm (folded)
Max unassisted rise at 1:12 gradient: 7.62 cm (3 inches)
Weight: 6.6 Kg
Design Load Capacity: 340 Kilograms 750 lbs. (53 stone)
5 foot ramp: Length: 1500 mm
Width: 760 mm (open) 390 mm (folded)
Max unassisted rise at 1:12 gradient: 12.5 cm (5 inches)
Weight: 8.8 Kg
Design Load Capacity: 340 Kilograms 750 lbs. (53 stone)
GRADIENT INFORMATION
A 1-12 gradient is recommended for unassisted access with a 1-6 gradient being acceptable for assisted access.
To work out your gradient use the following simple method:
Step height measurement x 12 will give you the required length of ramp for a 1-12
gradient.
Step height measurement x 6 will give you the required length of ramp for a 1-6 gradient
When ramp is fitted into position, check clear space from bottom edge of ramp to kerb
or obstacle. This space should be at least 1000mm (39 ½ inches).